| Customization: | Available |
|---|---|
| After-sales Service: | One-Year Remote Warranty |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Roughing Mill
The roughing mill consists of six flat-vertical short stress mills arranged alternately. The nominal diameter of the roll is 550mm, and the length of the roll body is 760 mm. The range of application is 610 mm to 520 mm. There is a crank flying shear at the exit of rough rolling mill. The maximum cross-section is 4000mm. It is used to cut the head and tail of the rolled piece after rough rolling and to break the rolled piece in case of an accident.
Intermediate Rolling Mill
The intermediate rolling mill is composed of six short stress mills arranged alternately by horizontal and vertical mills without archway. The nominal diameter of the roll is 400 mm, and the length of the roll body is 650 mm. The range of application is 430 mm to 370 mm. There is a crank flying shear at the exit of the medium rolling mill. The maximum section of the shear is 2050 mm. It is used for cutting the head and tail of the rolled piece after medium rolling and breaking the rolled piece in case of an accident.
Finishing Mill
The finishing mill consists of three flat, one vertical and two flat-vertical convertible short stress mills without archway. The nominal diameter of the roll is 350 mm, and the length of the roll body is 650 mm. The range of application is 370 mm to 310 mm. The finishing mill is equipped with a crank rotary changeable flying shear with a maximum shear section of 1300 mm and a length of 45 m to 72.
Bar Rolling Mill Cooling Bed
The cold bed is a stepping rack type with an area of 8m*78m, a rack spacing of 300mm/600mm, a pitch of 80mm and a working period of less than 2.8s.
Fixed Length Cold Shear
Fixed-length cold shear is upper-cut, the shear force is 5 kN, blade width is 950 mm, shear times are 10 times per minute
| Type | Rolling MillSpecification | Max./Min Roll Diameter Фmm |
Roll Body Length mm | Max. Rolling Force (t) | Largest RollingTorque t.m |
| Short StressPath Rolling MMil |
Ф600 Hi 2 | 650/570 | 800 | 244 | 28 |
| Ф550 Hi 2 | 600/500 | 800 | 220 | 18 | |
| Ф450 Hi 2 | 495/420 | 700 | 140 | 12.2 | |
| Ф400 Hi 2 | 430/370 | 650 | 90 | 4.28 | |
| Ф350 Hi 2 | 380/330 | 600 | 71 | 2.4 | |
| Ф320 Hi 2 | 380/330 | 600 | 61 | 2.2 |
Xi'an Hani Tech Co.,Ltd.
Hani Tech is a Hot Rolling Mill manufacturing company working mainly in the area of bar and wire rod mills, high-speed wire rod mills, high-speed rebar rolling mills, TMT rolling mills, flying shear, cold strip rolling mills, reheating furnaces, induction furnaces, intermediate frequency furnace, electric arc furnace, Ladle refining furnace, blast furnace, continuous casting machine.
And we also provide all the parts for roughing rolling mill, and intermediate rolling mill process, including pinch roll, flying shear, cold shear, crop shear, gripping shear, and wire rod mill laying head, all of these crucial parts work extremely precisely and reliably. It is a technology-intensive product that combines modern rolling mill techniques with machine electron, hydraulic, pneumatic, and instrument. Only a few countries in the world can offer complex, high precision, and difficult technology We can supply designing, manutacturing, installation, and commissioning for your requirements about rolling mill plant with "turn-key"service.
And from the initial conception of the plant, Hani is the one-stop supplier able to design, manufacture, install and commission your hot rolling mill plant from A to Z. In order to further develop the international market, we have successively set up three overseas offices Dubai Office of the United Arab Emirates, Yangon Office of Myanmar, and Tehran Office of lran.
HANI STEEL can provide you services of:
Design, manufacture, installation and after-sales service of various steel production lines such as wire, bar, steel bar, angle steel, pipe, etc.
HANI STEEL supplies various rolling mills, including small rolling mills, large rolling mills, roughing mills, intermediate rollingmills, etc. as well as finishing mills, which can improve your production capacity and save costs.
HANI STEEL also produces all auxiliary equipment for steel rolling, including 1# shear, 2# shear, 3# shear, double length shear, water-washing equipment, speed increaser, speed reducer, cylinder system, hydraulic system, etc. In addition, we provide a variety of spare parts, rollers, bearings, motors, flanges, universal joints, couplings, sensors, etc. Adequate spare parts can make your production smoother.
If your steel mill needs to upgrade equipment, optimize processes, increase production capacity, and save costs, we have professional process engineers who can provide you with relevant services.
Q1: Are you trading company or manufacturer?
A: We are manufacturer.HANI STEEL is committed to serving the steel manufacturing industry more than 20 years.We have dozens of successful project cases around the world. HANI provides customers with customized solutions, ranging from turnkey projects to single rolling mill production lines. We aim to optimize production processes and improve efficiency. Our main equipment include rolling mills, shears, gearboxes, pinch rolls, laying heads, loopers and other steel rolling mill related products.
Q2: How long is your delivery time?
A: Generally it is 60 days, it is according to quantity requires.
Q3: What is the term of payment?
A: Payment <=1000USD,100%in advance. Payment>=1000USD,30% T/T in advance, balance before shipment.
lf you are interested in this equipment, please don't hesitate to contact us!
Q4:Where is your factory? How can I visit there?
HANI's factory is located at CASA Mansion A, Chang'an Avenue, Beilin District, Xi'an, Shaanxi Province
Warmly welcome customers at home and abroad to visit us! Please contact us to find out. We encourage our clients to prioritize online video conferencing to resolve issues.
lf the machine is not suitable for your plant, please e-mail us the following information:
1. What's the quality standard of billet do you want to casting? ls it common carbon steel or low carbon steel?
2. What's the billet size and length?
3. Do you have melting furnace? lf yes, how many tons of furnace with how many quantity?
4. What's the capacity per hour? According to your information, we will offer high efficiency design and best price for it.
){kind=link}